background image

en 

Cleaning and servicing

10

Resetting the connection

Saved connections to the home network and to
Home Connect can be reset.

Press and hold ⁠  and ⁠  until LED 7 goes out in the
LED display.

a

An audible signal sounds.

Remote diagnostics

Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.

Tip: 

For further information and details about the avail-

ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com

Data protection

Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the

Home Connect

 server (initial registration):

¡

Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).

¡

Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).

¡

The current software and hardware version of your
appliance.

¡

Status of any previous reset to factory settings.

This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.

Note: 

Please note that the Home Connect functions

can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.

Declaration of Conformity

BSH Hausgeräte GmbH hereby declares that the appli-
ance with Home Connect functionality meets the essen-
tial requirements and other relevant provisions of the
Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.siemens-home.bsh-group.com  among
the additional documents on the product page for your
appliance.

2.4 GHz band: 100 mW max.
5 GHz band: 100 mW max.

BE

BG

CZ

DK

DE

EE

IE

EL

ES

FR

HR

IT

CY

LV

LT

LU

HU

MT

NL

AT

PL

PT

RO

SI

SK

FI

SE

UK

NO

CH

TR

5 GHz WLAN (Wi-Fi): For indoor use only.

Cleaning and servicing

To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.

Cleaning products

You can obtain suitable cleaning products from after-
sales service or the online shop.

WARNING ‒ Risk of electric shock!

An ingress of moisture can cause an electric shock.

Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box.

Do not use steam- or high-pressure cleaners to
clean the appliance.

WARNING ‒ Risk of burns!

The appliance will become hot during operation.

Allow the appliance to cool down before cleaning it.

ATTENTION!

Unsuitable cleaning products may damage the sur-
faces of the appliance.

Do not use harsh or abrasive detergents.

Do not use cleaning products with a high alcohol
content.

Do not use hard scouring pads or cleaning
sponges.

Do not use any special cleaners for cleaning the ap-
pliance while it is hot.

Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.

Wash sponge cloths thoroughly before use.

Cleaning the stainless steel surfaces

1.

Observe the information regarding the cleaning
agents. 
→ 

"Cleaning products", Page 10

2.

Clean using a sponge cloth and hot soapy water in
the direction of the finish.

3.

Dry with a soft cloth.

4.

Apply a thin layer of the stainless steel cleaning
product with a soft cloth.

Tip: 

You can obtain stainless steel cleaning products

from after-sales service or the online shop.

Summary of Contents for LR26CBS20





























Reviews: