7
Removing the fleece grease filter
:
Risk of fire!
Grease deposits in the grease filter may catch fire.
Replace the grease filter at least every two months.
Never operate the appliance without the grease filter.
Note:
Only use genuine replacement filters. This ensures
compliance with safety regulations and optimal performance of
the appliance.
1.
Press the locks on the left and right of the filter grid.
2.
Swing the filter grid down.
3.
Position the filter grid at an angle and remove it.
4.
Remove the wires and then remove the fleece grease filter.
5.
After removing the fleece grease filter, clean the inside of the
appliance.
6.
Clean the filter grid.
Fitting the fleece grease filter
1.
Trim the new fleece grease filter to the required size and
place it in the filter grid.
2.
Clamp the fleece grease filter in place with the wires.
3.
Insert the filter grid.
Note:
Make sure that the locks on the left and right of the
filter grid engage.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
Malfunction table
--------
Problem
Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to
the electricity supply
Power cut
Check whether other
kitchen appliances are
working
Faulty fuse
Check in the fuse box to
make sure that the fuse for
the appliance is OK
The lighting
does not work.
The bulbs are
faulty.
For information on chang-
ing the bulbs, see the
"Replacing Bulbs" section.
