Multi Address Appearance on OpenStage
00.00.2007
I 21
Ring delay
: Time interval in seconds after which the line starts ringing on an incoming call.
Default: 0
Selection order
: Priority assigned to the line for the selection of an outgoing line.
Default: 0
Address
: Address/phone number which has a corresponding entry on the SIP server/registrar.
Realm
: Domain wherein user id and password are valid.
User Identifier
: User name for authentication with the SIP server.
Password
: Password for authentication with the SIP server.
Shared type
: Determines whether the line is a shared line (shared by multiple endpoints) or a
private line (only available for this endpoint). Value range: "shared", "private", "unknown".
Default: "shared"
Hot/Warm line type
: Determines whether the line is a hot line or a warm line. Value range:
„hot line“, „warm line“
Hot/Warm line destination
: Number to be dialed when the phone is in hotline or warmline
mode.
Allow in Overview
: Determines whether the line appears in the phone’s line overview. Value
range: "Yes", "No"
Default: "Yes"
Hot warm action (V2)
: Determines if the line is a regular line, a hot line, or a warm line. Value
range: "No action", "hot line", "warm line"
Hot warm destination (V2)
: The destination to be dialed from the hot/warm line when the
user goes off-hook.
Remark
: A new line key can only be added by use of the WBM or, preferably, using the WPI [4]. Once
a line key exists, it can also be configured by the local menu.
