background image

 

MDS D423 
C79000-G8976-C319-01, 05/2013 

5

 

Ambient temperature 

 

During operation 

 

Transport and storage 

 
-25 °C to +85 °C 

-40 °C to +100 °C 

Weight 

Approx. 10 g 

1)

  2 hours, 2 m, +20 °C 

2)

  steam jet: 150 mm; 10 to 15 l/min; 100 bar; 75 °C 

3)

  vacuum dryer: up to 20 mbar 

4)

  The values for shock and vibration are maximum values and must not be applied continuously. 

5

  ) To prevent it loosening, secure the screw with screw locking varnish. 

6  

 

Dimensional drawing 

 

šs

šs

š

 

Dimensions in mm 
Figure 6-1 

Dimension drawing for MDS D423 

 

Trademarks 

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication may be trademarks whose 

use by third parties for their own purposes could violate the rights of the owner. 

Disclaimer of Liability 

We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot 

be precluded entirely, we cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any 

necessary corrections are included in subsequent editions. 

Siemens AG 

Industry Sector 

Postfach 48 48 

90026 NÜRNBERG 

 

MDS D423 

C79000-G8976-C319, 05/2013 

Summary of Contents for MDS D423






Reviews: