manualshive.com logo in svg

Siemens Moore 353, User Manual

The Siemens Moore 353 is a highly efficient automation product, and our website provides a free User Manual for this device. Gain access to this comprehensive manual, available for instant download from our website 88.208.23.73:8080. Maximize your understanding of the Siemens Moore 353 for seamless integration into your operations.

Share
Download
background image

UM353-1 

Data Mapping 

March 2003 

 

 

7-1 

7.0  DATA MAPPING 

This section provides loop and station data mapping for Modbus, Local Instrument Link, and Ethernet.  Modbus is 
standard. LIL and Ethernet option boards are available and the correct board must be installed to enable either 
communication protocol.  With the Ethernet option, data is accessed using Modbus commands embedded within the 
TCP protocol.  This is becoming known within the industry as the Open Modbus/TCP Protocol.  
 
The controller has an RS232 port that always communicates via Modbus.  It is located on the underside of the 
operator faceplate. 
 
Each controller also has a multi-drop network connection that is either Modbus, LIL (when the optional LIL board 
is installed), or Ethernet (when the optional Ethernet board is installed). The Ethernet connection is made using the 
standard RJ45 connector. The network can interconnect: 

• 

Procidia i|pac, Moore 352

Plus

, Moore 353 and Moore 354N Controllers and a computer running i|ware PC

, 

ProcessSuite™, MYCROADVANTAGE™ or other operator interface software that includes the 
communication driver (e.g. Modbus, LIL (320), or OPC Ethernet) in the controller. 

• 

Procidia i|pac, Moore 352

Plus

, Moore 353 and Moore 354N Controllers and an APACS

®

 Model 39ACM 

Advanced Control Module via Modbus or LIL 

 
The network permits data to be uploaded from the station to the computer or workstation. This data is typically used 
for process and alarm monitoring, additional processing of the data for inventory management and accounting, and 
process and equipment troubleshooting. Data can be downloaded to the station to change setpoint or valve value, 
change control mode, and acknowledge alarms. 
 
Proprietary data transfers associated with configuration upload/download or on-line monitoring associated with the 
i|config Graphical Configuration Utility are not described.  MPU Controller firmware versions are identified as 
explained in earlier sections. 

7.1  CONNECTING TO APACS 39ACM, MYCROADVANTAGE, ProcessSuite, i|ware PC 

7.1.1  APACS 

A Model 39ACM (Advanced Control Module) supports both Modbus and LIL connections.  Use the standard 
Modbus Master Function Block Library to communicate with a station.  When requesting Modbus data, do not 
exceed 48 coils or 60 registers per request.  A LIL function block library (P/N 15939-625V4.00 ACM Serial 
Communication FB Library LIL) that provides a method for connecting the ACM to standard LIL stations is 
available.  The library includes a Moore 352P/353/354 Loop block.  The current release of the library maps the 
352P/353/354 as having 3-loops located at channels 8, 13, and 18.  Therefore, it is necessary to configure ODC 
function blocks for these channels.  It is expected that later releases of the library will allow multiple loops, up to 
maximum allowed.  Also, data from additional loops can be obtained by using a combination of other library 
functions such as LIL_GBL, LIL_NGBL, and LIL_CMD. 

7.1.2  MYCROADVANTAGE 

Model 320 Driver 

 
MYCROADVANTAGE provides a LIL(320) driver that will communicate with stations on a Local Instrument Link 
(LIL).  Standard, predefined parameter tables for many LIL products (e.g. Models 351 and 352) are within 
MYCROADVANTAGE to simplify configuration.  MYCROADVANTAGE release 3.32 does not include a Model 
352P/353/354 predefined parameter table.  However, when up to three control loops are to be configured in a Model 
352P, 353 or 354, use the Model 351 predefined parameter table and configure the ODC blocks in the loops to 
channels 8, 13, and 18.  This method will work since the loop data in the controller is the same as a 351and is 
located at the same relative offsets as in a 351.  Loops can also be configured individually.  Details on the 
configuration can be found the MYCROADVANTAGE user manual. 

StockCheck.com

Summary of Contents for Moore 353



















































































































































































































































































































Reviews:

No comments

Related manuals for Moore 353

ABB FDNA-01 Quick Installation And Start-Up Manual preview
FDNA-01
Brand: ABB Pages: 2
Abicor Binzel EWR Quick Install Instructions preview
EWR
Brand: Abicor Binzel Pages: 8
Daikin BRC1H71W Installation Manual preview
BRC1H71W
Brand: Daikin Pages: 38
Daikin BRC1H71W Operation Handbook preview
BRC1H71W
Brand: Daikin Pages: 2
Daikin BRC1E72 Operation Manual preview
BRC1E72
Brand: Daikin Pages: 148
Daikin EHVH04S18CA Operation Manual preview
EHVH04S18CA
Brand: Daikin Pages: 12
Daktronics RC-100 Operation Manual preview
RC-100
Brand: Daktronics Pages: 52
Waeco RC-100 Installation And Operating Instructions Manual preview
RC-100
Brand: Waeco Pages: 20
Z-Wave RC-100 Operating Instructions Manual preview
RC-100
Brand: Z-Wave Pages: 56
Ebyte E180-Z5812SP Product Manual preview
E180-Z5812SP
Brand: Ebyte Pages: 35
LANGER EMV-Technik E 1 User Manual preview
E 1
Brand: LANGER EMV-Technik Pages: 48
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Brand: Samson Pages: 6
Baier 50VA Instruction Manual preview
50VA
Brand: Baier Pages: 20
Allen-Bradley ArmorBlock 1732E-16CFGM12R Installation Instructions Manual preview
ArmorBlock 1732E-16CFGM12R
Brand: Allen-Bradley Pages: 20
Integral 1502 LT Repair Instructions preview
1502 LT
Brand: Integral Pages: 7
select solar EPHC 10A Instruction Manual preview
EPHC 10A
Brand: select solar Pages: 2
Yoshitake GD-46 Series Instruction Manual preview
GD-46 Series
Brand: Yoshitake Pages: 18
TCP SmartStuff Series Quick Start Manual preview
SmartStuff Series
Brand: TCP Pages: 2

Brands by name

Popular brands

Load more brands