Safety instructions
2.3 Data protection
Unified Comfort Panels
24
Operating Instructions, 03/2020, A5E46641217-AA
Additional information
You can find additional information on security management of HMI devices on the Internet
at the following address:
Panel Security Guidelines (
https://support.industry.siemens.com/cs/de/en/view/109481300
2.3
Data protection
Siemens observes the data protection guidelines, especially the requirements regarding data
minimization (privacy by design). This means the following for this SIMATIC product: The
product does not process / save any personal information, but only technical functional data
(e.g. time stamps). If the user links this data to other data (e.g. shift plans) or if the user
saves personal information on the same medium (e.g. hard disk) and therefore creates a
personal reference in the process, the user has to ensure meeting the guidelines regarding
data protection.
2.4
Notes about usage
NOTICE
The HMI device is approved for indoor use only.
The HMI device may be damaged if it is operated outdoors.
Operate the HMI device indoors only.
Note
Operate the device only in a normal atmospheric environment
The technical characteristics of the device described in the operating instructions are
guaranteed if you operate the device in normal ambient air conditions with usual air
composition.
Note
The device is intended for operation in an SELV/PELV circuit according to IEC/EN 61131 or
IEC/EN 61010-2-201 in a dry environment, which means a dry environment on the rear of
the device.
Additional information is available in the section "Operating conditions (Page 148)".