7
en
Operating the appliance
Operating the appliance
W
Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
X
Fig.
F
■
Stand the mincer on a clean, level work
surface.
■
Take power cord out of the cable
storage and pull out to the required
length.
■
Put the completely assembled mincer
attachment, inclined slightly to the right,
on the drive.
■
Turn mincer attachment upwards until it
engages.
■
Tighten threaded ring on the mincer
attachment.
■
Attach filling tray.
■
Insert pusher into filling opening.
■
Place a bowl or plate under the outlet
opening.
■
Insert the mains plug.
■
Switch appliance on with the On/Off
button.
■
Place the food to be processed in the
filling tray.
■
Only use the pusher when adding more
ingredients.
Application instructions:
If the food to be chopped up jams in the
worm gear: Use reverse button to remove
the blockage.
1.
Switch appliance off with the On/Off
button.
2.
Wait until the drive comes to a standstill.
3.
Briefly press reverse button.
4.
Wait until the drive comes to a standstill.
5.
Switch appliance on with the On/Off
button.
After using the appliance:
■
Switch appliance off with the On/Off
button.
■
Remove mains plug.
■
Pull out the pusher.
■
Remove filling tray.
■
Remove the mincer attachment. Holding
down the release button, turn the
attachment to the right and remove.
■
Disassemble mincer attachment.
■
Clean all parts, see “Cleaning and
servicing”.
Shredding attachment
For shredding and slicing cheese, fruit,
vegetables, nuts, almonds, dried bread rolls
and pieces of bread, chocolate and other
hard foods.
W
Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not grip the sharp blades and edges
of the shredding and slicing inserts.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
X
Fig.
G
■
Place required insert in the housing of
the shredding attachment. The insert is
automatically locked when the appliance
is switched on.
■
Put the shredding attachment, inclined
slightly to the right, on the drive.
■
Turn shredding attachment upwards
until it engages.
■
Place a bowl or plate under the outlet
opening.
■
Insert the mains plug.
■
Place the food to be processed in the
feed tube.
■
Insert pusher and hold in place.
Note:
Pusher can be inserted in one direction
only. Note position of the curve!
■
Switch appliance on with the On/Off
button.
■
Press food down using the pusher.
Do not exert too much pressure!