GAMMA
instabus
Technical product information
July 2008
Switching actuator, submodule N 512/21
5WG1 512-1AB21
3x AC 230/400V, 16A, C-load, load-check
Siemens AG
N 512/21, 4 pages
Technical manual
Industry Sector, Building Technologies
Electrical Installation Technology
© Siemens AG 2008
Update: http://www.siemens.com/gamma
P.O. Box 10 09 53, D-93009 Regensburg
Subject to change without further notice
2.4.3.3/3
Mechanical data
•
Housing: plastic
•
Dimensions: DIN rail mounted device in N dimensions,
width 3 module units (1 module unit = 18 mm)
•
Weight: approx. 225 g (inclusive of bridging connec-
tor)
•
Fire load: approx. 2800 kJ
•
Installation: Snap-on mounting on DIN rail
EN 60715-TH35-7.50
Electrical safety
•
Degree of pollution (according to IEC 60664-1): 2
•
Type of protection (according to EN 60529): IP 20
•
Overvoltage category (according to IEC 60664-1): III
•
Device complies with: EN 50090-2-2 and EN 60669-2-1
EMC requirements
•
Complies with EN 50090-2-2, EN 50428 and
EN 60669-2-1
Environmental conditions
•
Climatic withstand capability: EN 50090-2-2
•
Ambient operating temperature: - 5 ... + 45
°
C
•
Storage temperature: - 25 ... + 70
°
C
•
Relative humidity (not condensing): 5 % to 93 %
Markings
•
none (no device with bus interface)
CE mark
•
In accordance with the EMC guideline (residential and
functional buildings), low voltage guideline
Location and function of connectors
A1
A2
A3
Figure 2. Connectors
A1
Jack for connection of a switching actuator sub-
module to a switching actuator main module or to a
preceding submodule
A2
Jack for connection of a further switching actuator
submodule
A3
Screw-type terminals of outputs 1...3
Installation and wiring
Mounting / dismounting the device:
see figure 3 and 4
Figure 3. Mounting the device
B1
B2
