Installation
136/293
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • NXPLUS C • 802-9081.9
Duct elements on the switchgear
For installation of the horizontal pressure relief duct on the switchgear, the following
elements are required. Here, the elements for a panel width of 600 mm are shown as an
example.
Bolting material
Designation
Size
Illustration
Bolt-and-washer assembly
M8
Setnut
M8
Designation
Detailed designation
Illustration
Side plate
Connecting element, lateral
evacuation, left side (with pre-
assembled evacuation duct
element)
Side plate
Connecting element, lateral
evacuation, right side (with pre-
assembled evacuation duct
element)
Rear wall
Connecting element, rear
evacuation, (with pre-
assembled evacuation duct
element)
Rear wall
Rear wall, closed
Top cover
Top cover with ventilation