4 / 12
Siemens
A6V10881141_en--_c
Smart Infrastructure
2019-04-25
Push-button addressing
Display current address (digits in reverse order)
The Modbus address can be set without a separate tool by using the push-button and LED.
To display the current address, press button <1s.
Colors
1-digits:
red
10-digits:
green
100-digits:
orange
Example for address 124:
LED
Note
The address is entered and shown in reverse order.
Set new address (digits in reverse order)
1.
Enter addressing mode
: press button > 1s until LED shines
red
, then release button
(before LED gets dark).
2.
Enter digits
: press button n-times
à
LED flashes per button press (feedback).
Colors: 1-digits:
red
/ 10-digits:
green
/ 100-digits:
orange
3.
Store digits
: press button until LED shines in color of following digits – release button,
4.
Save address
: press button until LED shines
red
(confirmation)
à
release button.
An address can be stored at any time, i.e. after setting the 1-digits, or after setting the 1-
and the 10-digits.
5. Entered address is repeated one times for confirmation.
Note: If button is released before LED shines red, the address is discarded.
Examples
Set address “124”:
1. Enter addressing mode
2. Set 1-digits: Press button 4-times
à
LED flashes
red
per button press
3. Store 1-digits: press button until LED shines
green
– release button
4. Set 10-digits: Press button 2-times
à
LED flashes
green
per button press
5. Store 10-digits: press button until LED shines
orange
– release button
6. Set 100-digits: Press button 1-times
à
LED flashes
orange
per button press
7. Store address: press button until LED shines
red
– release button
à
address is stored and displayed 1x for confirmation
Set address “50”:
1. Enter addressing mode
2. Skip 1-digits: Hold button pressed until LED shines
green
– release button
3. Set 10-digits: Press button 5-times
à
LED flashes
green
per button press
4. Store address (skip 100-digits): hold button pressed until LED shines
red
– release button
à
address is stored and displayed 1x for confirmation
Set address “5”:
1. Enter addressing mode
2. Set 1-digits: Press button 5-times
à
LED flashes
green
per button press
3. Store address: press button until LED shines
red
à
address is stored and displayed 1x for confirmation
