background image

Document No. 129-367 
Installation Instructions  
September 1, 2003 

Dimensions 

90

2-3/4

(70)

5/32

(4)

13/16

(21)

3-7/16

(87)

5-7/16

(137)

15/16

(94)

7/16

(11)

min. 4 inch

100 mm

2-3/8

(60)

1/32

(0.8)

EA0530R3

min. 1/4 inch

6 mm

min. 8 inch

200 mm

min. 3/8 inch

10 mm

min. 1 inch

25 mm

min. 2-3/8 inch

60 mm

 

 
 

6-5/8
(168)

7-1/16

(180)

EA0531R2

1/2

(12)

25/32

(20)

 

 

 

Figure 16.  Dimensions of the OpenAir GDE/GLB Actuator and Mounting Bracket. 

References 

EA GDE/GLB-1 

155-187P25 

OpenAir

 Electronic Damper Actuators 

GDE/GLB Series Non-spring Return Rotary  
24 Vac Modulating Control 

EA GDE/GLB-2 

155-188P25 

OpenAir

 Electronic Damper Actuators 

GDE/GLB Series Non-spring Return Rotary  
24 Vac Three-Position Control 

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as 
design improvements are introduced. OpenAir is a trademark of Siemens Building Technologies, Inc. Other product or company names mentioned 
herein may be the trademarks of their respective owners. © 2003 Siemens Building Technologies, Inc. 

 

Siemens Building Technologies, Inc.  

1000 Deerfield Parkway 

Your feedback is important to us. If you have 
comments about this document, please send 

Buffalo Grove, IL  60089-4513 
U.S.A. 

them to 

technical.editor@siemens.com

 

 

Page 6 of 6

 

Document No. 129-367 

Printed in the U.S.A. 

Summary of Contents for OpenAir GDE131.1P







Reviews: