HiPath 8000 functions
111
Step by Step
Call forwarding unconditional
With
Call forwarding unconditional
(CFV), all incom-
ing calls are forwarded to a different destination.
You can use the feature code to activate/deactivate this
function and define a forwarding destination.
Activating
^
Lift the handset.
j
Enter the access code (see access code table
Æ
page 121) and the forwarding destination. After the
confirmation tone, the
r
key lights up and the for-
warding is indicated on the display.
If the "Courtesy call" function is active, the System dials
the phone to which you forwarded your calls.
•
If the party at this phone answers, you can inform
him or her that your calls are being forwarded. Now
the
r
key lights up and the forwarding is indica-
ted on the display.
•
If the party does not answer or the station is busy,
activate the feature once again. If you complete this
operation within two minutes, you will hear the con-
firmation tone followed by the dial tone. The System
does not output an acoustic signal to inform the oth-
er party at the forwarding destination about the sec-
ond activation.
If
Call forwarding unconditional
is active, calls for-
warded when the line is idle are signaled by a short ring
burst (around 0.5 seconds) at the forwarded station.
This is a reminder that this feature is active.
Deactivating
^
Lift the handset.
j
Enter the access code (see access code table
Æ
page 121). You hear the confirmation tone.
