Step by Step
Enhanced phone functions
68
Speaker call in a group
You can also establish a normal connection within a
group or team (with team call = speed dial numbers 0-
9 or 00-99 for team members) via a speaker call. The
speaker call is then initiated by a group telephone.
Speaker call to a variable destination
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
j
Enter the system code for "COM group speaker call"
(contact the relevant service personnel if necessary).
or
S
Press the "COM Group" programmed sensor key.
j
Enter the speed dial number for the corresponding
group member.
A connection is immediately established to this destina-
tion station’s loudspeaker if
•
the station is not busy
•
the handset has not been lifted
•
"Do not disturb" is not activated
^
The called party accepts the DSS call by lifting the hand-
set.
n
or
S
If the called party presses the speaker key or the line
key (if configured), the connection is lost.
Speaker call to a fixed destination
The system code for "COM group speaker call" and the
speed dial number for the corresponding group mem-
ber are programmed on a repdial key
Æ
page 80.
S
Press the programmed repdial key. A connection to the
destination loudspeaker is immediately established.
^
The called party can accept the connection by lifting the
handset.
n
or
S
If the called party presses the speaker key or the line
key (if configured), the connection is lost.
The "COM group speaker call" function is line-in-
dependent - all phones can call each other via a
speaker call.
Enter code!
