Siemens PolyBlend PB200-2, Manual

- 1 - 

PB200-2 

WATER TECHNOLOGIES 

TELEPHONE 

815-932-8154 

P.O.BOX 

389 

    800-882-6466 

BRADLEY, IL  60915 

FACSIMILE 

815-939-9845

PolyBlend 
Model #PB200-2 
INSTALLATION, OPERATION, AND MAINTENANCE INFORMATION 

CONTENTS 

 
 Overview 

Warranty 

 Installation 

Appendixes 

 Operation 

Drawings 

 Maintenance 

OVERVIEW

 
SAFETY PRECAUTIONS 
 

  Ensure that the control panel is grounded to avoid 

possible electrical shock or damage to equipment. 

  Before servicing, turn off all power and assure 

power “lockout” to avoid possible electric shock. 

  Disconnect external power to the control panel 

before removing or replacing fuses. 

 
 
SPECIFICATIONS  
 
Pump Diaphragm 
Inlet 

1/2” FPT, Water Supply 
5/8” Hose Barb, Polymer Supply 

Outlet 

3/4” FPT, Solution Discharge 

Water Capacity 

100 GPH Primary 
100 GPH Post Dilution 

Polymer Capacity 

2.0 GPH 

Pressure Rating 

100 PSI 

Electrical Supply 

120/1/60, 6 Amps 

Dimensions 

23" H x 12" W x 16" D 

Weight 65 

lbs. 

Motor(s) 

(1) 1/6 HP, 120VAC, 3.6 AMPS 

INSTALLATION

 
LOCATION 
 
Select a location that provides: 
 
• Electrical 

Supply 

• 

Potable Water (Clean) 

• 

Proximity to the Point of Use 

• 

Easy Handling and Storage of Polymer 

• 

Access to Unit 

• 

Protection Against Severe Weather 

 
 
UNPACKING 
 
Examine package contents for damage. Report any to 
freight forwarder. Check plastic bag(s) for contents 
against individual packing list(s). 
 

NOTE: Disregard any moisture; this unit was 
wet tested. 

 
 
CONNECTIONS  
 
•  Use Teflon tape on threads. Use joint compound 

(pipe dope) in small amounts, if necessary. 

• 

Do not over-tighten fittings.  

•  Insure that supply water pressure is 

less than 100 

psi. 

• 

Install water isolation valve with unions. 

•  Insure that neat polymer feed line has a 

flooded 

suction. 

NOTE: To enhance performance, reduce the 
number of piping turns and elevation changes. 

 
 
STORAGE 
 
Store in atmosphere controlled environment. Protect 
from extreme temperature (above 110

°

F, 52

°

C, below 

32

°

F, 0

°

C) and wide ambient temperature fluctuations. 

 
Protect from direct weather exposure, i.e., sun, rain, 
high wind, etc. 

READ THIS MANUAL BEFORE YOU 
INSTALL, OPERATE, OR SERVICE THIS 
UNIT.