Siemens ProtoAir Start-up Guide
Page 19 of 66
6
CONFIGURE THE PROTOAIR
6.1
Accessing the ProtoAir W eb Configurator
•
Navigate to the IP Address of the ProtoAir on the local PC using one of two methods:
o
Open a web browser and enter the IP Address of the ProtoAir; the default Ethernet address is
192.168.1.24, the default Wi-Fi Access Point address is 192.168.50.1
o
If using the FieldServer Toolbox (
Section
), click the Connect button
NOTE: If the IP Address of the ProtoAir has been changed, the IP Address can be discovered
using the FS Toolbox utility. See
for instructions.
6.2
Select Field Protocol Configuration
•
On the Web Configurator page, the first configuration parameter is the Protocol Selector.
•
Select the configuration desired, using the number key under the Parameter Description header,
and click the Submit button.
o
A message will appear at the top of the screen stating that the update was completed and to
restart the system.
•
Click the System Restart button on the bottom of the screen and wait for the system to reset.
Figure 13: Web Configurator Showing Protocol Selector Parameter
