RCC10U Room Temperature Controller
Technical Instructions
for Two-pipe Fan Coil Units
Document Number 155-712
September 27, 2007
Siemens Industry, Inc.
Page 9
4-inch × 4-inch Electrical
Wall Box Mounting,
Continued
7. Terminate wires per wiring instructions located above the terminal block.
Figure 8. Wiring Termination.
8. Reattach the controller to the controller base.
9. Secure by tightening the screw at the bottom of the controller.
Figure 9. Controller Reattachment.
The installation is now complete.
