30
MAN-100472
RD150 - Operating Instructions
57030-EN-180717
1. Select with
[->]
the menu item "Upper Range" and confirm with
[OK]
.
2. Edit the value with
[OK]
and set the cursor to the requested posi-
tion with
[->]
.
3. Set the requested value with
[+]
and store with
[OK]
.
4. With "
ESC
" you can return to the menu overview "
Setup
".
The adjustment of the Upper Range is hence finished.
In this menu item, the measuring range beginning value of the sensor
is set.
Proceed as follows:
1. Select with
[->]
the menu item "
Lower Range
" and confirm with
[OK]
.
2. Edit the percentage value with
[OK]
and set the cursor to the
requested position with
[->]
.
3. Edit the value with
[OK]
and set the cursor to the requested posi-
tion with
[->]
.
4. Set the requested value with
[+]
and store with
[OK]
.
5. With "
ESC
" you can return to the menu overview "
Setup
".
The adjustment of the Lower Range is hence finished.
To damp process-dependent measured value fluctuations, set an inte
-
gration time of 0 … 999 s in this menu item. The increment is 1 s.
In this menu item, the device status is displayed.
In this menu item, you read out the instrument serial number:
Setup - Lower Range
Setup - Damping
Diagnostics - Device
status
Info - Serial number
