3. Symbol
1
will flash. Press
+
or
-
to select or deselect each day and advance to
the next day. Confirm setting for actual timer by pressing
ok
and advance to the
next timer.
1
The controller will leave the programmable timer setting mode if no button is pressed
within 20 seconds. All changes made after the last press of
ok
button will not be
saved.
Press the
Prog
button to sequentially review the 8 timers.
View the timers
Timers A1…A4 have the following default setting:
Default timer setting
Day/s
Time when controller is in Normal operation
Mo (1) – Fr (5)
06:30 – 08:30 (A1)
17:30 – 22:30 (A2)
Sa (6)
08:00 – 23:00 (A3)
Su (7)
08:00 – 22:30 (A4)
- During the remaining time, controller is in Energy Saving mode
- Timers A5…A8 are free, no default setting
The setting of these timers can be changed to suit individual needs. The default setting
can be reloaded any time:
Reload default timer
setting
1.
Set the controller to Standby .
2.
Press
+
and
-
simultaneously for 3 seconds. Release them and, within 2 seconds,
press 2 times
Prog
.
Then, the display will show “8888“ during the reloading process.
In case two, or when several timer sequences overlap, the resulting output is the OR
combination of the normal operating mode time of all timers.
Overlapping of timer
sequences
A1=09:00-22:00
A2=12:00-20:00
09:00
12:00
20:00
22:00
3058D04
Resulting output = 09:00-
22:00
The 7day-time clock supports the 12-hour and 24-hour format. The format is chosen
during setting of the time clock as follows:
7day-time clock
1. Keep the button depressed until the time digits start to flash and then press
+
or
-
to set the time of day.
If the current time is the 24-hour format and you wish to
change to the 12-hour format, press
+
passing 23:59 or press
-
passing 00:00. Vice
versa back to the 24-hour format
.
Setting the time clock
2. Confirm the time of day by pressing
ok
and the weekday indicator starts to flash.
6/14
Siemens
Room Temperature Controllers
N3067en
Building Technologies
01.10.2007
