2 / 91 A6V11562445_en--_a
en
2.
Set an administrator password to prevent access to advanced
settings.
We recommend a strong password, particularly if the thermostat is
installed in a public location. If you decide to skip this step, you can
also set the password later under >
Advanced Settings
>
Password
.
3.
Two ways to set up a network connection:
Select Network
– Follow the on-screen step-by-step instructions
to connect to a WLAN
1
network.
Push Button Setup
– Connect to a WPS compatible router.
Note:
You can skip this step if the network connection fails or you want to
connect to the network another time.
Using the WPS router feature:
a.
Press the WPS button on your router when prompted by your
thermostat.
b.
Tap
Connect
on your thermostat to connect to the network.
c.
After a connection is established, continue with other settings as
desired.
4.
Select the equipment type.
Tap to manually configure the thermostat.
Select the type of heating system corresponding to your
thermostat.
1
Your thermostat operates in a frequency band range from 2.4 GHz to 2.4835 GHz, and the maximum radio-
frequency power transmitted in the frequency band is 18 dBm.
