7
Siemens Industry, Inc.
A6V11727385
Smart Infrastructure
06/20/2019
Installation Location
● The devices are suitable for wall installation.
● Recommended height: 5 feet above the floor.
● Do not install the devices in recesses, shelves, behind curtains or doors, or above or
near heat sources.
● Avoid direct exposure to sun and drafts.
● Seal the conduit or backwall as drafts can affect sensor readings.
● Observe maximum ambient conditions.
Wiring
Use only class 2 rated power source with proper current limiting.
Installation
Thermostat may be mounted directly on wall using drywall anchors and screws (included).
For installation on a 2” × 4” conduit box , use the appropriate mounting plate and plastic trim
piece (included).
WARNING
No user serviceable parts inside.
Risk of fire and injury due to short-circuits
● Use properly sized wires for connections
Commissioning
Refer to the Quick guide and User guide (see Product Documentation [
6]) to configure
your device. Commissioning includes the following:
● Internet connection
● Application setup
● Account registration and device pairing
NOTE:
Before configuring your thermostat, make sure you have Internet connection, a valid
email address, and a smartphone.
Operation
Operating System
