Installation
2.3 Installation on the DIN rail
RUGGEDCOM RM1224
Operating Instructions, 10/2016, RC1260-EN-02
19
Installation
1. Insert the SIM card, see section "SIM card (Page 27)".
2. Prepare the drill holes for wall mounting. For the precise dimensions, refer to the section "
Dimension drawing (Page 39)".
3. Secure the device to the wall with two screws. When mounting on a wall, use mounting
fittings suitable for the type of wall.
4. Connect the power supply, refer to the section "Power supply (Page 28)".
5. Fit the connectors for the digital input and digital output, refer to the section "Digital
input/output (Page 30)".
6. Connect the antenna, refer to the section "Antennas (Page 32)".
7. Connect the device to the local network, refer to the section "Ethernet port (Page 35)".
8.
Connect the terminal with as short a cable as possible ≤ 150 mm and a large cross-
sectional area ≥ 2.5 mm² to the ground of the system, see section "Grounding (Page 29)"
2.3
Installation on the DIN rail
Requirement
There is a SIM card for the device.
Summary of Contents for RUGGEDCOM RM1224
