Chapter 3
Device Management
RUGGEDCOM ROS
User Guide
92
Configuring IP Services
12
13
11
10
9
8
7
6
5
4
3
2
1
Figure 46: IP Services Form
1.
Inactivity Timeout Box
2.
Telnet Sessions Allowed Box
3.
Web Server Users Allowed Box
4.
TFTP Server Box
5.
Modbus
Address Box
6.
SSH Sessions Allowed Box
7.
RSH Server Options
8.
IP Forward Options
9.
Max Failed Attempts Box
10.
Failed Attempts Window Box
11.
Lockout Time Box
12.
Apply Button
13.
Reload Button
2. Configure the following parameter(s) as required:
Parameter
Description
Inactivity Timeout
Synopsis:
1 to 60 or { Disabled }
Default:
5 min
Specifies when the console will timeout and display the login
screen if there is no user activity. A value of zero disables
timeouts. For Web Server users maximum timeout value is limited
to 30 minutes.
Telnet Sessions Allowed
Synopsis:
1 to 4 or { Disabled }
Default:
Disabled
Limits the number of Telnet sessions. A value of zero prevents any
Telnet access.
Web Server Users Allowed
Synopsis:
1 to 4 or { Disabled }
Default:
4
Limits the number of simultaneous web server users.
TFTP Server
Synopsis:
{ Disabled, Get Only, Enabled }
Default:
Disabled
As TFTP is a very insecure protocol, this parameter allows user to
limit or disable TFTP Server access..
DISABLED - disables read and write access to TFTP Server
GET ONLY - only allows reading of files via TFTP Server
ENABLED - allows reading and writing of files via TFTP Server
ModBus Address
Synopsis:
1 to 255 or { Disabled }
Default:
Disabled
