RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Configuring STP for Specific Ethernet Ports
165
Figure 95: Port RSTP Parameters Table
2. Select an Ethernet port. The
Port RSTP Parameters
form appears.
8
10
7
6
5
4
3
2
1
11
9
Figure 96: Port RSTP Parameters Form
1.
Port(s) Box
2.
Enabled Options
3.
Priority List
4.
STP Cost Box
5.
RSTP Cost Box
6.
Edge Port List
7.
Point to Point List
8.
Restricted Role Box
9.
Restricted TCN Box
10.
Apply Button
11.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
Port(s)
Synopsis:
Any combination of numbers valid for this parameter
The port number as seen on the front plate silkscreen of the
switch (or a list of ports, if aggregated in a port trunk).
Enabled
Synopsis:
{ Disabled, Enabled }
Default:
Enabled
