RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Configuring MAC Address Flooding Options
189
1. Navigate to
MAC Address Tables
»
Configure MAC Address Flooding Options
. The
Flooding Options
table appears.
Figure 116: Flooding Options Table
2. Select a port. The
Flooding Options
form appears.
4
3
2
1
Figure 117: Flooding Options Form
1.
Port(s) Box
2.
Flood Unknown Unicast Options
3.
Apply Button
4.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
Port(s)
Synopsis:
Comma-separated list of ports
The port number as seen on the front plate silkscreen of the
switch (or a list of ports, if aggregated in a port trunk).
Flood Unknown Unicast
Synopsis:
{ On, Off }
Default:
On
Normally, unicast traffic with an unknown destination address is
flooded out of all ports. When a port is configured to turn off this
kind of flooding, the unknown unicast traffic is not sent out from
the selected port.
4. Click
Apply
.
