RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Configuring GMRP for Specific Ethernet Ports
229
Figure 158: Port GMRP Parameters Table
3. Select an Ethernet port. The
Port GMRP Parameters
form appears.
4
3
1
2
Figure 159: Port GMRP Parameters Form
1.
Port(s) Box
2.
GMRP List
3.
Apply Button
4.
Reload Button
4. Configure the following parameter(s) as required:
Parameter
Description
Port(s)
Synopsis:
Any combination of numbers valid for this parameter
The port number as seen on the front plate silkscreen of the
switch (or a list of ports, if aggregated in a port trunk).
GMRP
Synopsis:
{ Disabled, Adv Only, Adv&Learn }
Default:
Default: Disabled
Configures GMRP (GARP Multicast Registration Protocol) operation
on the port. There are several GMRP operation modes:
• DISABLED - the port is not capable of any GMRP processing.
• ADVERTISE ONLY - the port will declare all MCAST addresses
existing in the switch (configured or learned) but will not learn
any MCAST addresses.
• ADVERTISE & LEARN - the port will declare all MCAST Addresses
existing in the switch (configured or learned) and can
dynamically learn MCAST addresses.
5. Click
Apply
.
