RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Configuring Port Rate Limiting
75
Figure 27: Port Rate Limiting Table
2. Select an Ethernet port. The
Port Rate Limiting
form appears.
6
5
4
3
2
1
Figure 28: Port Rate Limiting Form
1.
Port Box
2.
Ingress Limit Box
3.
Ingress Frames List
4.
Egress Limit Box
5.
Apply Button
6.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
Port
Synopsis:
1 to maximum port number
Default:
1
The port number as seen on the front plate silkscreen of the
switch.
Ingress Limit
Synopsis:
62 to 256000 Kbps or { Disabled }
Default:
1000 Kbps
The rate after which received frames (of the type described by the
ingress frames parameter) will be discarded by the switch.
Ingress Frames
Synopsis:
{ Broadcast, Bcast&Mcast, Bcast&Mcast&FloodUcast,
Bcast&FloodUcast, FloodUcast, All }
Default:
Broadcast
This parameter specifies the types of frames to be rate-limited on
this port. It applies only to received frames:
• Broadcast - only broadcast frames
