RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Managing Remote Monitoring
93
Parameter
Description
Determines the Modbus address to be used for Management
through Modbus.
SSH Sessions Allowed (Controlled Version Only)
Synopsis:
1 to 4
Default:
4
Limits the number of SSH sessions.
RSH Server
Synopsis:
{ Disabled, Enabled }
Default:
Disabled (controlled version) or Enabled (non-
controlled version)
Disables/enables Remote Shell access.
IP Forward
Synopsis:
{ Disabled, Enabled }
Controls the ability of IP Forwarding between VLANs in Serial
Server or IP segments.
NOTE
When upgrading to ROS v4.3, the default will be set
to { Enabled }.
Max Failed Attempts
Synopsis:
1 to 20
Default:
10
Maximum number of consecutive failed access attempts on
service within Failed Attempts Window before blocking the
service.
Failed Attempts Window
Synopsis:
1 to 30 min
Default:
5 min
The time in minutes (min) in which the maximum number
of failed login attempts must be exceeded before a service is
blocked. The counter of failed attempts resets to 0 when the timer
expires.
Lockout Time
Synopsis:
1 to 120 min
Default:
60 min
The time in minutes (min) the service remains locked out after the
maximum number of failed access attempts has been reached.
3. Click
Apply
.
Section 3.10
Managing Remote Monitoring
Remote Monitoring (RMON) is used to collect and view historical statistics related to the performance and
operation of Ethernet ports. It can also record a log entry and/or generate an SNMP trap when the rate of
occurrence of a specified event is exceeded.
CONTENTS
•
Section 3.10.1, “Managing RMON History Controls”
•
