RUGGEDCOM WIN
User Guide
Chapter 3
Device Management
Managing Software Versions and Upgrades
23
3. To clear the statistics for a selected service flow, select the service flow in the
Service flow statistics
table
and click
Clear SF statistics
.
4. To clear the statistics for all service flows, click
Clear All
.
Section 3.4
Managing Software Versions and Upgrades
The following sections describe how to manage software versions and upgrades:
•
Section 3.4.1, “Upgrading Device Software”
•
Section 3.4.2, “Viewing Software Properties”
•
Section 3.4.3, “Loading the Primary Software Version”
•
Section 3.4.4, “Loading the Secondary Software Version”
•
Section 3.4.5, “Configuring the Primary Software Version”
•
Section 3.4.6, “Downloading Software from an FTP Server”
•
Section 3.4.7, “Managing Memory Banks”
•
Section 3.4.8, “Viewing the Status of an Operation”
•
Section 3.4.9, “Canceling an Operation”
Permanent memory storage is organized in two memory banks,
1
and
2
. Two versions of the operating system
software can be stored on the device, one in each memory bank. Each memory bank is designated as either the
Primary
or
Secondary
memory bank. When you reset or reboot the device, it always runs the software installed in
the
Primary
bank. The Web console provides controls to change the
Primary
and
Secondary
designations on the
memory banks, and to reboot the device using the
Secondary
memory bank for testing. Software saved in one
bank can be copied to the other, allowing you to create backups and to restore or update versions as required.
CONTENTS
•
Section 3.4.1, “Upgrading Device Software”
•
Section 3.4.2, “Viewing Software Properties”
•
Section 3.4.3, “Loading the Primary Software Version”
•
Section 3.4.4, “Loading the Secondary Software Version”
•
Section 3.4.5, “Configuring the Primary Software Version”
•
Section 3.4.6, “Downloading Software from an FTP Server”
•
Section 3.4.7, “Managing Memory Banks”
•
Section 3.4.8, “Viewing the Status of an Operation”
•
Section 3.4.9, “Canceling an Operation”
Section 3.4.1
Upgrading Device Software
For safety and reliability, the device software upgrade process consists of the following steps, with checks and
verification at several stages: