RUGGEDCOM WIN
User Guide
Chapter 4
System Administration
Configuring RADIUS User Authentication
49
1. Navigate to
Management » Security » Radius Login Settings
. The
Radius Login Settings
screen appears.
Figure 45: Radius Login Settings Screen
2. Configure the following parameter(s) as required:
Parameter
Description
Radius Login
Synopsis:
{ Enable, Disable }
Enables or disables RADIUS Authentication mode.
Allow Local Login
Synopsis:
{ Yes, No }
Enables or disables local login.
If local login is disabled, users cannot log in with the user name,
admin@local
. Only users with user names configured in the
Permitted Users
list can log in. For more information about the
Permitted Users
list, refer to
.
NOTE
After local login has been disabled, users cannot
access the Security menu to enable local login while
there is an active connection to an AAA server. If
the connection to the configured AAA servers is lost,
local login will be enabled.
Login AAA IP Address
The configured Web Login AAA Server IP Address.
Login AAA Port
The configured Web Login AAA Server Port.
Login AAA Secret
The configured Web Login AAA Server Secret.
NAS ID
The Radius NAS Identifier.
3. Click
Apply
.