Chapter 5
Setup and Configuration
RUGGEDCOM WIN
User Guide
78
Managing SNMPv3
Parameter
Description
Read Community name must be different from the SNMP Write
Community name.
SNMP Write Community
Default:
private
The SNMP community name for write access. This name can
be used as a password for secure set commands. The SNMP
Write Community name must be different from the SNMP Read
Community name.
SNMP Trap Community
Default:
public
The SNMP community name to use when the SNMP service
receives a request that does not contain the correct community
name and does not match an accepted host name.
5. Click
Apply
.
Section 5.12.4
Managing SNMPv3
This section describes how to manage SNMPv3.
CONTENTS
•
Section 5.12.4.1, “Adding SNMPv3 Users”
•
Section 5.12.4.2, “Deleting SNMPv3 Users”
•
Section 5.12.4.3, “Viewing SNMPv3 Access Groups”
Section 5.12.4.1
Adding SNMPv3 Users
To add an SNMPv3 user, do the following:
1. Navigate to
Management » SNMP
. The
SNMP General Settings
screen appears.
2. Click
SNMPv3 Configuration
. The
SNMPv3 Configuration
screen appears.