RUGGEDCOM WIN5151
Installation Guide
Chapter 4
Technical Specifications
Power Supply Requirements
29
Technical Specifications
This section provides important technical specifications related to the subscriber unit.
CONTENTS
•
Section 4.1, “Power Supply Requirements”
•
Section 4.2, “Power Consumption”
•
Section 4.3, “Radio and Modem Specifications”
•
Section 4.4, “Operating Environment”
•
Section 4.5, “Mechanical Specifications”
•
Section 4.6, “IDU to ODU Cable Specifications”
•
Section 4.7, “Dimension Drawings”
Section 4.1
Power Supply Requirements
The RUGGEDCOM WIN5151 requires an external power supply that meets the following requirements:
AC Model
Power Supply
Rated Input Power
Rated Output Power
RUGGEDCOM WIN1010
100 to 240 VAC, 50 to 60 Hz, 1.5 A
48 VDC, 48 W
100 to 240 V~, 50 to 60 Hz
52 VDC, 25 W @ 85 °C (185 °F)
RUGGEDCOM RP100
125/250 VAC
52 VDC, 25 W @ 85 °C (185 °F)
100 to 240 V~, 50 to 60 Hz
52 VDC, 12 W @ 85 °C (185 °F), 10 W @ 75 °C (167 °F)
RUGGEDCOM RP110
125/250 VAC
52 VDC, 12 W @ 85 °C (185 °F), 10 W @ 75 °C (167 °F)
DC Model
Power Supply Type
Class 2
Input Range
10 to 30 VDC