Parameters
number
Specifies the number of retry attempts for the Wireless AP registration process.
Valid entries are integers from 1 - 255.
Examples
The following example sets the number of registration retry attempts to 4:
WLC.siemens.com
:ap:registration# dretry 4
passwd
Use the
passwd
command to assign a password for telnet accessible Wireless APs. The
passwd
command is accessible from the ap:registration context of the CLI.
passwd telnet password
Parameters
telnet password
Specifies the telnet password. The telnet password must be between 5 and 30
alphanumeric characters. Do not confuse the telnet password with the ssh
password.
Examples
The following example assigns password ‘thisistelnetpassword’:
WLC.siemens.com
:ap:registration# passwd thisistelnetpassword
security
Use the
security
command to allow only approved Wireless APs to connect to the Wireless
Appliance. Use the no form of the command to allow all Wireless APs to connect to it. The
security
command is accessible from the ap:registration context of the CLI.
Wireless APs without connection approval are put into a pending state, and an administrator has to
manually approve those connections.
security no security
Parameters
None
Examples
The following example allows only approved Wireless APs to connect to the Wireless Appliance:
WLC.siemens.com
:ap:registration# security
ap Commands
passwd
SCALANCE WLC711 CLI Reference Guide
103
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
