Radio Mode
Minimum Basic Rates
a
6 | 12 | 24
ac-strict
6 | 12 | 24 | MCS0,1 | MCS1,1 | MCS2,1 | MCS3,1 | MCS4,1 | MCS5,1 | MCS6,1
| MCS7,1
an
6 | 12 | 24
anac
6 | 12 | 24
b
1 | 2 | 5.5 | 11
g
6 | 12 | 24
gn
6 | 12 | 24
n-strict
6 | 12 | 24 | MCS0 – MCS7
bg
1 | 2 | 5.5 | 11
bgn
1 | 2 | 5.5 | 11
Usage
The minimum basic rate must be lower than or equal to the configured maximum basic data rate and
maximum data rate that clients can operate at while associated with the AP.
Example
This example sets the mode for radio 2 to g, then sets the minimum basic data rate to 12 Mbps:
WLC.siemens.com
:ap:defaults:11n:radio2# mode g
WLC.siemens.com
:ap:defaults:11n:radio2# minbrate 12
mode
Use the
mode
command to set the radio options for the radio context. The
mode
command is accessible
from all radio contexts of the CLI. Depending on the radio mode you select, some of the radio settings
may not be available for configuration.
Syntax: (11n and ap37xx, radio1)
mode a | an | n-strict
Syntax: (11n and ap37xx, radio2)
mode b | g | gn | n-strict | bg | bgn
Syntax: (dualband)
mode a | b | g | bg
Syntax: (4102 and std, radio2)
mode b | g | bg
ap Commands
mode
SCALANCE WLC711 CLI Reference Guide
128
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
