Use the
mheartbeat
command to set the time interval (in seconds) for the connection establishment
response between the Mobility Agent and the Mobility Manager.
mheartbeat value
Parameters
value
Specifies the interval time in seconds between outgoing heartbeats
Examples
The following example sets the outgoing heartbeats to occur at 5 second intervals:
WLC.siemens.com
:mobility# mheartbeat 5
slpreg
Use the
slpreg
command to enable SLP registration. Use the no form of the command to disable it.
slpreg
no slpreg
Parameters
None
Examples
The following example enables SLP registration:
WLC.siemens.com
:mobility# splreg
agent
Use the
agent
command to add, remove, or approve an agent on the network by its IP address when
the current controller serves as a mobility manager.
The role of the Wireless Appliance must be set to Manager before this option becomes available. For
more information, see
on page 199.
agent (add|remove|approve|backupMgr) IP Address
Parameters
add
Adds an agent to the network
remove
Removes an agent from the network
approve
Approves an agent on the network
mobility Commands
slpreg
SCALANCE WLC711 CLI Reference Guide
200
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...