19
wlans Commands
clients
create
delete
remote-ssid
show
<WLAN-service-name>
This section describes commands used to define and configure WLAN services for the network. These
commands are located in the wlans context of the CLI. Execute the
wlans
command at the root level to
enter wlans context.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, you must exit and re-enter the
context in order to ensure that the database is synchronized with the latest change.
The following commands are available in the wlans context:
•
on page 275 — See
on page 275 for commands in the wlan:clients context.
•
on page 279
•
•
on page 280
•
on page 281
•
on page 281 — See for commands in the wlan:<WLAN-service-name>
context.
clients
The clients context provides commands which are used to configure guest access features on the
Wireless Appliance. Switch to the clients context from the wlans context to access the following
commands on the Wireless Appliance.
A guest portal WLAN service must be created on this controller before the clients context command
and the context's associated commands are available. For more on creating a guest portal WLAN
service, see
on page 302.
The following commands are available in the wlan:clients context.
•
•
•
•
•
on page 278
SCALANCE WLC711 CLI Reference Guide
275
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
