Example
The following example displays the currently available remote SSIDs:
WLC.siemens.com
:wlans# remote-ssid
There is no remotable SSID in the mobility domain.
show
Use the show command from the wlans context to display WLAN service configuration information.
show [WLANS-name]
Parameters
WLANS-name
Specifies to display information about the specific WLAN service
Usage
The Radio Mode field displays the 802.11 modulations that the AP’s radios are configured to use.
Examples
Example code is not currently available.
<WLAN-service-name>
The
<WLAN-service-name>
command, where <WLAN-service-name> is the name of a given WLAN
service, moves you into the wlan:<WLAN-service-name> context, which contains commands to
configure the settings of the specified individual WLAN service.
The following commands are available in the wlan:<WLAN-service-name> context. Different
commands are available depending on the type of WLAN server being configured.
•
on page 282
•
on page 282
•
•
•
on page 285 for commands in the wlan:<WLAN-service-name>:auth
context.
•
on page 313
•
on page 313
•
•
•
on page 315
•
•
on page 317 — See for commands in the wlan:<WLAN-service-name>:priv context.
•
on page 322
wlans Commands
show
SCALANCE WLC711 CLI Reference Guide
281
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
