create
Use the
create
command to create a multicast filter rule. The
create
command is available from the
topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and routed topologies.
create [pos] (A.B.C.D[/0-32] | vocera | svp | mdns | all) on|off
Parameters
pos
|
default
Specifies the optional position to insert the rule.
A.B.C.D
[/
0-32
] |
vocera
|
svp
|
mdns
|
all
Specifies the IP address and mask of a multicast group or that the multicast
group is pre-defined.
•
svp: Spectralink SVP (224.0.1.116)
•
vocera: Vocera Mcst (230.230.0.0/20)
•
mdns mDNS/Bonjour (224.0.0.251)
•
all (allow all: 0.0.0.0/0)
on
|
off
Specifies whether wireless replication is enabled. The default is off.
Example
This example creates a multicast filter rule:
WLC.siemens.com
:topology:techpubs_test_ac:l2:multicast# create 1
225.1.1.0/32 on
delete
Use the
delete
command to delete a multicast filter rule. The
delete
command is available from the
topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and routed topologies.
delete pos
Parameters
pos
The position of the multicast filter rule. Position can range from 0 to 255.
Example
This example deletes a multicast filter rule at position 2:
WLC.siemens.com
:topology:test:l2:multicast# delete 2
filter
Use the
filter
command to enable or disable multicast filtering support. The
filter
command is
available from the topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and
routed topologies.
filter enable | disable
Parameters
topology Commands
create
SCALANCE WLC711 CLI Reference Guide
346
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
