enable
Indicates that multicast filtering support is enabled.
disable
Indicates that multicast filtering support is disabled.
Example
This example enables multicast filtering support:
WLC.siemens.com
:topology:test:l2:multicast# filter enable
move
Use the
move
command to change the order of multicast rules. The
move
command is available from
the topology:<named-topology>:l2:multicast context of the CLI for b@ac, b@ap, and routed topologies.
move pos pos
Parameters
pos
The current position of the multicast rule. Possible values are 0–255.
pos
The new position of the multicast rule. Use a number one greater than the
last rule to move a rule to the bottom of the list. Possible values are 0–255.
Example
This example moves multicast rule 2 to the bottom of the list (after position 4):
WLC.siemens.com
:topology:test:l2:multicast# move 2 5
show
Use the
show
command to show multicast support for the specified topology. The
show
command is
available from the topology:<named-topology>:l2: multicast context of the CLI for b@ac, b@ap, and
routed topologies.
show
Parameters
None
Example
This example shows the multicast support for a topology named r1:
WLC.siemens.com
:topology:r1:l2:multicast# show
Multicast support: disable
port
Use the
port
command to assign a port to a topology. The
port
command is available from the
topology:<named-topology>:l2 context of the CLI for b@ac and physical topologies.
topology Commands
move
SCALANCE WLC711 CLI Reference Guide
347
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
