1
About This Guide
Who Should Use This Guide
How to Use This Guide
Text Conventions
The Command Line Interface (CLI) is used to configure the SCALANCE WLC711 and the SCALANCE W
Controller Access Points. It is accessible directly on the controller's console port, or via Secure Shell
(SSH) access on the ESA or Management ports.
Who Should Use This Guide
This guide is intended for system test, network administrators, and development engineers who
understand all components of the SCALANCEWLC711.
How to Use This Guide
This guide contains the following chapters
•
on page 11 describes the overall context structure of the CLI.
•
on page 16 describes commands that appear within every context level of
the CLI.
•
on page 22 describes commands available from the root context of the Wireless
Appliance.
•
on page 81 describes commands that manage the functions of Wireless APs on a
system using the Wireless Appliance.
•
on page 158 describes commands to enable and disable L2 ports on the
Wireless Controller.
•
on page 161 describes commands to configure routing information.
•
on page 169 describes commands to configure the login authentication modes —
local authentication and RADIUS
-
based authentication.
•
on page 175 describes configurable options for the detection of rogue Access
Points, DoS attacks, and other potential network intrusion events.
•
on page 198 describes commands to manage the exchange of client session
information across a network.
•
on page 203 describes commands to schedule data backups.
•
on page 209 describes commands to configure scheduling an
upgrade and back up of the controller’s software.
•
on page 212 describes commands to manage Simple Network Management
Protocol (SNMP) settings for the Wireless Appliance.
•
on page 220 syslog Commands, describes commands to configure System Log
settings.
SCALANCE WLC711 CLI Reference Guide
8
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
