ap Context
The following commands are at the highest (first) level of the ap context:
•
on page 82
•
on page 83 — See for commands in the ap:blacklist context.
•
on page 86 — See for commands in the ap:defaults context.
•
•
on page 91
•
on page 92 — See for commands in the ap:load-groups context.
•
•
•
on page 100 — See for commands in the ap:maintenance context.
•
on page 101 — See for commands in the ap:registration context.
•
•
•
on page 105
•
on page 144 for commands in the ap:<serial>
context.
access
Use the
access
command to modify the registration status of Wireless APs on the system. The
access
command is accessible from the ap context of the CLI.
access ap_serial release | pending | approved | reboot | foreign | sensor [force]
If rehoming is enabled, the command to change a local AP to a Foreign AP is:
access ap_serial foreign
The command to change a foreign AP to a Local AP is:
access ap_serial approved
Parameters
ap_serial
The serial number of the Wireless AP.
release
|
pending
|
approved
|
reboot
|
foreign
|
The administrative options for the Wireless AP.
Usage
Rehoming is enabled if availability is enabled between two V9.01 and higher controllers. Both
Controllers need to be in the same regulatory domain. Sensors and APs in WDS/MESH configurations
cannot be rehomed. APs in load groups will be removed from the load group if they are rehomed.
ap Commands
ap Context
SCALANCE WLC711 CLI Reference Guide
82
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
