The following example adds an OUI from a MAC address to the MAC address list:
WLC.siemens.com
.com:ap:blacklist# mac 22:22:22 24
The following example adds an IAB from a MAC address to the MAC address list:
WLC.siemens.com
:ap:blacklist# mac FF:FF:FF:FF:F 36
mac-list-mode
Use this command to set the mode of the MAC address list. If the MAC address list mode is black, the
MAC addresses on the list identify clients that are not allowed to associate with the AP (a “blacklist”). If
the MAC list mode is white, only the clients identified by the MAC addresses on the list are allowed to
associate with the AP (a “whitelist”).
mac-list-mode black | white
Parameters
black
Sets the MAC address list as a blacklist, denying clients on the list access to the AP.
This is the default.
white
Sets the MAC address list as a whitelist, allowing only clients on the list access to the
AP.
Usage
If you change the mode from blacklist to whitelist, all existing MAC addresses on the list will be erased.
Use the
show
command to list the current mode and entries in the MAC address list.
Examples
This example shows the system prompt printed when changing from black mode to white mode:
WLC.siemens.com
:ap:blacklist# mac-list-mode white
Change address list from whitelist to blacklist or vice versa will erase all
existing address. Are you sure to do it?
(yes/no):no
mac-list-sync-mode
Use this command to synchronize the blacklist and whitelist between two controllers configured in
availability.
mac-list-sync-mode enable | disable
Parameters
enable
Enables mac-list-sync-mode, which synchronizes MAC addresses between
controllers configured as blacklisted or whitelisted.
disable
Disables mac-list-sync-mode, so that blacklisted or whitelisted MAC addresses are
not synchronized between controllers.
ap Commands
mac-list-mode
SCALANCE WLC711 CLI Reference Guide
85
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...