•
on page 224 describes commands to set the system time for the Wireless
Appliance, and configure network time protocol options.
•
on page 227 describes commands to manage the TCPDump.
•
on page 232 describes commands used to manage user accounts on the network.
•
on page 234 VNS Commands (vnsmode), describes commands for the
setup of virtual network services (VNS) for the network.
•
on page 275 describes commands used to define and configure WLAN services
for the network.
•
describes commands used to define and configure policies for the Wireless
Appliance.
•
on page 340 describes commands used to define and configure topology
objects used by policy and VNS objects.
•
Location-Based-Service (lbs) Commands
on page 377 describes commands used to configure the
Wireless APs for use with an AeroScout or Ekahau location
-
based service.
•
on page 381 describes commands used to configure the web settings.
•
on page 384 describes commands for configuring Classes of Service that can be
applied to policies.
•
on page 392 describes commands for configuring sites that have their own local
authentication server defined.
•
on page 409 describes commands used to enable and configure the Radio
Frequency (RF) Location engine on a Wireless Appliance to determine location and perform
tracking on wireless mobile users through Wireless APs.
•
on page 415 describes commands used in the publish context.
Related Documentation
SCALANCE WLC711 documentation is available at:
www.siemens.com/automation/service&support
Keyboard Shortcuts
There are several keyboard shortcuts available to assist in navigating within the contexts of the CLI.
•
To display options within a context or to complete partial entries of commands at the prompt, use
[CTRL] + I, [Tab], or the [?] key.
•
To transpose mi-
-
typed characters at the command prompt, use [CTRL] + T.
•
To recall previous commands executed for the session, use the UP arrow.
•
To cycle forward through previously executed commands, use the DOWN arrow.
Text Conventions
The following tables list text conventions that are used throughout this guide.
About This Guide
Text Conventions
SCALANCE WLC711 CLI Reference Guide
9
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
