•
on page 109
•
on page 109
•
•
•
on page 111
•
on page 112 — See
on page 117 for commands in the
ap:defaults:dualband:radio1 context.
•
on page 117 for commands in the
ap:defaults:dualband:radio2 context.
•
learnac
Use the
learnac
command to allow the Wireless AP to provide its own WLC Search List. Use no form
of the command to disable this feature. The
learnac
command is accessible from the ap:defaults
context of the CLI.
If you disallow the Wireless AP from providing its own WLC Search List, you should specify the
controller's static IP address by running the
aclist
command. For more information, see
on page
146. If you disallow the Wireless AP from providing its own WLC Search List and do not specify the
controller's static IP address, the Wireless AP uses the SLP to discover the controller.
After you run the
learnac
command, run the
apply
command to implement the changes.
learnac no learnac
Parameters
None
Examples
The following example allows each Wireless AP to provide its own WLC Search List:
WLC.siemens.com
:ap:defaults# learnac
std
The
std
command refers to context std, which contains commands to configure the default AP
settings for the standard Wireless AP. The
std
command is accessible from the ap:defaults context of
the CLI.
The following commands are available in the ap:defaults:std context:
•
•
•
on page 108
•
on page 109
•
on page 109
•
ap Commands
learnac
SCALANCE WLC711 CLI Reference Guide
90
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
