Parameters
#1
Specifies Server # 1 in the list of RADIUS servers
{
+
}
Specifies to move the RADIUS server up in order
{
-
}
Specifies to move the RADIUS server down in order
#2
Specifies Server # 2 in the list of RADIUS servers
Examples
The following example moves the Server # 1 to second in order in the list of RADIUS servers:
WLC.siemens.com
:login:auth# move 2 - 1
radtest_login
Use the
radtest_login
command to check the RADIUS server’s configuration. The
radtest_login
command is available from the login:auth context.
radtest_login user name password
Parameters
user name
User Name required to log on the controller
password
Password required to log on the controller
Examples
The following example tests the RADIUS server’s configuration:
WLC.siemens.com
:login:auth# radtest_login admin abc123
==> called pam_start (1)
got success
==> called pam_authenticate
got: ‘Success’
RETURN VALUE: 0 resp.code: 0
Test Result: Success
auth-order
Use the
auth-order
command to add an authentication mode to the end of the ordered list of
authentication modes. You can also delete an authentication mode from the ordered list.
auth-order add |
delete
radius
|
local
login Commands
radtest_login
SCALANCE WLC711 CLI Reference Guide
172
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
