Example
The following example shows a certificate request with a common name that is
an IPv6 address:
WLC.siemens.com
:ap:topology:Seg1_Routed:l3# gen_certreq [fd66:2280:2668::12]
location CA Ontario Mississauga organization mnj_Ware_House Service email
me@email.com ipv6 key-size 2048
ip
Use the
ip
command to specify the Wireless Appliance IP address and subnet mask for physical and
routed topologies or the interface IP address and subnet mask for b@ac topologies. The
ip
command
is available from the topology:<named-topology>:l3 context of the CLI for Admin, b@ac, physical, and
routed topologies.
ip A.B.C.D/0-32
Parameters
A.B.C.D
/
0-32
Specifies the IP address and subnet mask.
Example
The following example specifies an IP address and subnet mask:
WLC.siemens.com
:topology:r1:l3:# ip 10.109.0.1/30
ipv6
Use the
ipv6
command to specify a management IPv6 address and subnet mask for the Wireless
Appliance. The
ipv6
command is available from the topology:<named-topology>:l3 context of the CLI
for the Admin topology only.
ipv6 A:B:C:D:E:F:G:H/0-64 | none
Parameters
A:B:C:D:E:F:G:H
/
0-64
Specifies the IPv6 address and subnet mask.
none
Specifies that there is no IPv6 address configured for this controller.
Example
The following example specifies an IP address and subnet mask:
WLC.siemens.com
:topology:Admin:l3:# ipv6 fd66:2280:2668::13/64
mgmt
Use the
mgmt
command to allow or prohibit management traffic. The
mgmt
command is available from
the topology:<named-topology>:l3 context of the CLI for b@ac, physical, and routed topologies.
mgmt enable | disable
topology Commands
ip
SCALANCE WLC711 CLI Reference Guide
366
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...
