reset
Use the
reset
command to reset configuration settings on the Wireless Appliance to their factory.
reset license | mgmt
Parameters
license
Removes the installed license.
mgmt
Resets the management port configuration.
Examples
The following example resets all configuration settings on the Wireless Appliance except for the
management port configuration. You are prompted to confirm if you want to continue to reset the
Wireless Appliance:
WLC.siemens.com
# reset
WARNING: Resetting will clear all configuration except for the management
port configuration. It will disconnect any clients currently using the
system. Following the reset, the system will be rebooted.
Do you wish to continue? (y/n)
The following example resets all configuration settings on the Wireless Appliance including the
management port configuration. You are prompted to confirm if you want to continue to reset the
Wireless Appliance:
WLC.siemens.com
# reset mgmt
WARNING: Resetting management will clear all configuration including the
management port configuration. It will disconnect any clients currently using
the system. Following the reset, the system will be rebooted.
Do you wish to continue? (y/n)
The following example removes installed licenses and resets all configuration settings on the Wireless
Appliance including the management port configuration. You are prompted to confirm if you want to
continue to reset the Wireless Appliance:
WLC.siemens.com
# reset license mgmt
WARNING: Resetting the license and management will clear all configuration
and permanently delete any installed licenses. It will disconnect any clients
currently using the system. Following the reset, the system will be rebooted.
Activation key string : XXXXXXX-XXXXXXX-XXXXXXX-XXXXXXX-XXXXXXX
External Captive Portal Option Key:
Capacity Enhancement Option Keys:
Do you wish to continue? (y/n)
restart
Use the
restart
command to restart individual processes on the Wireless Appliance.
Use the show system_state process command to list the current processes on the Active Controller.
For more information, see
restart process_id | process_name
root Commands
reset
SCALANCE WLC711 CLI Reference Guide
41
Summary of Contents for scalance WLC711
Page 1: ...SCALANCE WLC711 CLI Reference Guide Release V9 21 14 C79000 G8976 C261 07 Published July 2015 ...
Page 21: ...dns 2 192 1 2 3 dns 3 192 1 3 3 Common Commands show SCALANCE WLC711 CLI Reference Guide 21 ...
Page 376: ...Example topology Commands vlanid SCALANCE WLC711 CLI Reference Guide 376 ...