Siemens scalance WLC711 Reference Manual Download

Page: 413 / 417

delete

Use the

delete

command to delete a floor plan from the location engine. The

delete

command is

accessible from the location:floor-plan context of the CLI.

delete floor-id

Parameters

floor-id

Specifies the name of the floor plan to be deleted.

Usage

Obtain the exact name of the floor plans by using the

show

command in this context.

Examples

The following example deletes floor plan Salem-third-floor:

WLC.siemens.com

:location:floor-plan# delete Salem-third-floor

on-demand

Use the

on-demand

command to track clients that may or may not be associated (have current

sessions) with the controller’s APs. Clients are identified by their MAC or user name. The

on-demand

command is accessible from the location context of the CLI.

on-demand (add MAC) | (remove MAC)

Parameters

add

remove

Add or remove an on-demand client from tracking.

MAC

Specifies a client to be added or removed, by MAC address.

Usage

A maximum of 32 on-demand users may be tracked at once.

Examples

The following example adds client with MAC address 00:1B:21:31:CF:31 for on-demand tracking:

WLC.siemens.com

:location# on-demand add 00:1B:21:31:CF:31

publish

Use the

publish

command to enter the publish context. The

publish

command is accessible from

the location context of the CLI.

RF Location Commands

delete

SCALANCE WLC711 CLI Reference Guide

413

Summary of Contents for scalance WLC711


































































































































































































































































































































































































































Search results

Summary of Contents for scalance WLC711

Reviews:

Related manuals for scalance WLC711

Brands by name

Popular brands

Siemens scalance WLC711, Reference Manual

Search results

Summary of Contents for scalance WLC711

Reviews:

Related manuals for scalance WLC711

Brands by name

Popular brands