Introduction
SCALANCE XC-100
Operating Instructions, 06/2016, C79000-G8976-C415-02
7
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You will find more information about Industrial Security in:
Industrial security (
http://www.siemens.com/industrialsecurity
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You will find more information about this in
Product support (
https://support.industry.siemens.com/cs/ww/en/ps/15247/pm
Trademarks
The following and possibly other names not identified by the registered trademark sign
®
are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM
Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to
the specification.
If you use damaged parts, this can lead to the following problems:
•
Injury to persons
•
Loss of the approvals
•
Violation of the EMC regulations
•
Damage to the device and other components
Use only undamaged parts.
1.
Make sure that the package is complete.
2.
Check all the parts for transport damage.
Recycling and disposal
The products are low in pollutants and can be recycled. For environmentally friendly
recycling and the disposal of your old device contact a certified disposal company for
electronic scrap.
