background image

          
 

AQUA-STOP guarantee

(does not apply to appliances without Aqua-Stop)

In addition to warranty claims against the seller based on the
purchase contract and in addition to our appliance warranty
we will pay damages under the following conditions:

1.  If our Aqua-Stop system is defective and causes water

damage, we will make good the damage for private users.

2.  This liability guarantee is valid for the service life of the

appliance.

3.  A prerequisite for the warranty claim is that the appliance

has been correctly installed and connected with Aqua-Stop
according to our instructions. 
“This also includes the correct installation of the Aqua-Stop
extension (original accessory).” 
Our warranty does not extend to defective feed lines or fittings
up to the Aqua-Stop connection on the tap.

4.  If your appliance is fitted with Aqua-Stop, you can leave your

appliance unattended during operation and leave the tap
turned on afterwards. The tap should only be turned off if you
are absent from home for a prolonged period, e.g. several
weeks holiday.

Siemens-Electrogeräte GmbH
Carl-Wery-Straße 34, 81739 München

To contact us directly, use the tel. no or fax no. in the
enclosed customer service list.

www.siemens-homeappliances.com

 
                                                                 
 

Downloaded from DishWasher-Manual.com Manuals

Summary of Contents for SE 65E332





























Reviews: