en
16
* depending on model
Additional options can be set with the
buttons
@
.
Ÿ
Express Wash *
The >>Express Wash<< function can
reduce the running time by approx. 20% to
50% depending on the selected rinse
programme. To obtain optimum cleaning
and drying results at a reduced running
time, water and energy consumption are
increased.
§
Half load *
If you have only a few items to wash (e.g.
glasses, cups, plates), you can switch to
“half load”. This will save water, energy
and time. It is recommended to put a little
less detergent in the detergent dispenser
than for a full load.
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to normal
conditions and the water hardness set
value 2. Different influencing factors such
as water temperature or mains pressure
may result in deviations.
Switching on the appliance
–
Turn on the tap fully.
–
Close the door.
–
Rotate programme selector
8
to the required programme.
–
Switch on the main switch
(
.
The programme sequence display
P
is lit.
–
The programme starts running.
End of programme
The programme has ended
when the programme cycle display
P
has gone out and the programme end
display
X
lights up.
Several minutes after
the end of the programme:
–
Switch off the main switch
(
.
–
Open the appliance door.
–
After letting the device cool down take
out the dishes.
–
Close the door.
Switching off the appliance
Short time after the end of the programme:
–
Switch off the main switch
(
.
–
Open the door.
–
Turn off the tap (not applicable if Aqua-
Stop fitted).
–
Remove the utensils when they have
cooled down.
ã=
Warning
At the end of the programme please open
the door fully and not partially
when emptying the dishwasher. Any
escaping water vapour could damage
sensitive worktops.
Additional options
Basic functions
